Insights · Yacht Buyer's Guide · 9 November 2026

Hatteras GT63 Buyer's Guide: The Modern Sportfish Flagship Explained

The Hatteras GT63 is a 63-foot-10-inch New Bern convertible with twin Caterpillar C32 power, now available only on the used market. This guide covers its legacy, design, tested performance, 2026 pricing context and what to inspect before you buy.

Dark cinematic black and gold view of a large sportfishing yacht with tower running offshore at dusk

The Hatteras GT63 is a 63-foot-10-inch convertible sportfishing yacht built by Hatteras Yachts in New Bern, North Carolina, and it is no longer in production. Every GT63 on the market is therefore a pre-owned boat, typically a build from roughly 2011 or 2012 to 2018 (sources differ), powered by twin Caterpillar C32 diesels, with the few asking prices we could document sitting in the low-to-mid seven figures in US dollars. This guide explains what the GT63 is, how it compares with its peers, what to inspect, and how a principal should approach the purchase.

What Is the Hatteras GT63 and Why Does It Still Matter?

The GT63 sits in the middle of Hatteras's GT series, which Power & Motoryacht described in its 2011 test as also including the GT60 and the GT54. It pairs a resin-infused fiberglass hull with a full tournament cockpit, a mezzanine seating area, and a four-stateroom accommodation plan that treats the guest experience as seriously as the fishing. For a family that wants to run offshore at speed, entertain aboard, and still hold its own at a tournament dock, it remains one of the more complete American convertibles of its size.

It also matters because the supply is finite. Hatteras's own site now lists its GT models as legacy, and the GT63 does not appear at all, so there will be no new hulls. Scarcity, rather than novelty, now shapes the market.

The Hatteras Legacy: From Knit Wits to New Bern

Hatteras Yachts dates to 1959, when founder Willis Slane built the 41-foot fiberglass Knit Wits, which the company describes as the first fiberglass boat over 40 feet. The brief was practical: a fishing boat strong enough for the seas off Cape Hatteras. That origin, in North Carolina's tournament culture, still defines the brand's identity more than any single model does.

The corporate history is worth knowing because it affects how a used boat has been supported. Brunswick Corporation owned Hatteras for years (Hulls.io dates its purchase from Genmar to November 2001, which we did not independently confirm) and sold its Hatteras and Cabo businesses in August 2013 to an affiliate of Versa Capital Management, as reported by Boat International and Versa. Hatteras states on its own website that White River Marine Group bought the brand in May 2021, and Bass Pro Shops has announced that acquisition on its newsroom. Hatteras remains based in New Bern. In short, a GT63 launched in the Brunswick era has had at least two later corporate owners at the builder level, which makes a documented service history more important than the badge.

Design DNA: What Makes the GT63 Different?

Three features define the boat, all reported by Power & Motoryacht and Marlin magazine in their original tests.

The cockpit is the other half of the story. Standard equipment on the tested boat included a bait and tackle center, an eight-cubic-foot bait freezer, two 60-inch in-deck fishboxes, an in-transom fishbox and mezzanine seating with refrigerated storage beneath. Options on the tested boats included a teak cockpit sole, a Pipewelders tower and outriggers, and a Pompanette fighting chair. A mezzanine-and-tower boat of this kind is a tournament platform first and a cruising yacht second, though a capable second.

We could not verify a named outside naval architect for the GT63. YachtBuyer attributes the design to Hatteras's in-house team, and that is the only attribution we repeat here.

Hatteras GT63 Specifications

The figures below come from the builder's published data as reproduced by Hulls.io, with fuel, water and performance cross-checked against Power & Motoryacht (displacement and dimensions rest on Hulls.io alone). Individual boats vary with options and year.

SpecificationDetail
Length overall63 ft 10 in (about 66 ft 11 in with bow pulpit)
Beam20 ft
Draft5 ft
DisplacementAbout 102,000 lb
Fuel capacity1,900 US gallons
Water capacity270 US gallons (listed as 300 on the 2011 test boat)
Standard powerTwin Caterpillar C32A, 1,600 bhp each
Optional powerTwin Caterpillar C32 ACERT, 1,800 or 1,900 bhp each
StateroomsFour standard; three-plus-office and galley-down layouts offered
BridgeOpen flybridge, or optional enclosed bridge

How Fast Is the Hatteras GT63, and What Does It Burn?

Power & Motoryacht tested a GT63 with the optional 1,900 bhp Caterpillar C32 ACERT engines, fully loaded with fuel, water and five people aboard. It recorded 35.0 mph at 1,750 rpm while burning about 124 gallons per hour, 40.7 mph at 2,000 rpm at about 152 gph, and a top speed of 46.2 mph at 2,250 rpm at about 200 gph, in slick-calm conditions. In knots, that is roughly 30 knots, 35 knots and 40 knots. Marlin recorded a top speed of 41.3 knots with the same engines.

Two cautions for a buyer. First, no published test figures were found for the standard 1,600 bhp engines, so do not assume the headline numbers apply to a boat with the base package. Second, fuel burn is the real operating cost. As simple arithmetic, not a published range, 1,900 gallons at 152 gph is about 12.5 hours of running before any reserve, which is a serious offshore day but not an ocean-crossing figure at that speed. Slower displacement-style running extends range considerably, so ask the seller for logged consumption rather than relying on brochure numbers.

On ride quality, Marlin's tester drifted beam-to in eight- to ten-foot Gulf Stream seas and described the roll as short and gentle, which is consistent with the hull form described earlier.

How Does the GT63 Compare With Viking, Jarrett Bay and Other Peers?

Buyers at this size usually cross-shop a small group of American builders. The differences are mostly about build philosophy and how much of the boat is yours to specify.

Builder / modelHome yardApproachHow it differs from the GT63
Hatteras GT63New Bern, NCProduction, resin-infused fiberglassPublished sea-trial data, four staterooms, optional enclosed bridge
Viking 64 ConvertibleNew Gretna, NJSemi-custom fiberglass; Healey family since 1964Compare engine fit and bridge type boat by boat
Jarrett Bay 64Beaufort, NCFully custom, cold-moldedOne-of-one specification; longer lead time and a different resale profile
Spencer 64Wanchese, NCCustom, cold-moldedBuilt to the owner's fishing program
BertramFlorida (various eras)Long-established sportfish brandCompare length, fuel, layout and bridge model by model

The honest summary is that the GT63 suits a buyer who wants a production platform with documented performance and a broad used market, while a Jarrett Bay or Spencer suits an owner who wants a boat built around a personal fishing program. Viking is the closest direct competitor in philosophy. We have not compared Ocean Yachts or Hargrave models in this guide and would not draw conclusions about them without model-specific data.

For a wider framework on weighing newer against older hulls, see our analysis of new versus used yacht buying.

What Should You Inspect on a Used Hatteras GT63?

A pre-purchase survey is non-negotiable on a boat of this value, and the following items deserve specific attention. They draw on the inspection priorities published by Hulls.io and on general sportfish practice.

Dockage is a practical point as well: size the slip from the 66 ft 11 in overall length with the bow pulpit, plus any tower or outriggers.

How Much Does a Used Hatteras GT63 Cost in 2026?

Public price evidence for the GT63 is sparse, and listings vary widely by year, engine option, hours and refit. These are the data points from the sources we reviewed, as of 2026:

As simple arithmetic on those named observations (not a published range or a valuation), the asking prices span about $1.7 million to $2.6 million, and the 2021 figures are now several years old. Asking prices are not transaction prices, and at the time we checked, YachtBuyer's live table showed no GT63s for sale even as its own text cited a current starting price, so verify availability directly.

The same source reports that ten GT63s listed over three years spent an average of 462 days on the market, with asking prices changing by only 0.9% on average. That suggests a slow, patient market in which well-presented boats hold their value and sellers rarely discount aggressively, though a buyer's negotiating position still depends on survey findings.

What Does Ownership Cost Beyond the Purchase Price?

The purchase price is the smaller part of a multi-year decision. Budget for fuel at the burn rates above, crew (a captain and mate for most owners), annual haul-out and bottom work, engine service, dockage, and an electronics refresh. Insurance for a boat of this size depends on owner experience, cruising area and named-storm exposure, and our yacht insurance cost guide explains how premiums are built. A buyer with high-visibility concerns will also want to read about yacht tracking and AIS privacy before the first offshore season.

Who Is the Hatteras GT63 Right For?

The GT63 suits an owner who fishes seriously, or entertains seriously, or both, and who is comfortable running a crewed offshore boat. It is a poor fit for someone seeking a quiet, low-fuel-burn cruiser, or an owner-operator unwilling to commit to systems maintenance. A competent owner can operate the boat, but its size, twin large diesels and offshore demands make a professional captain the norm, and underwriters may ask for documented experience. Families who want a four-stateroom layout with a genuine tournament cockpit, and who value the ability to reach the fishing grounds quickly, will find few better-documented used options.

If you are earlier in the process, our complete yacht buying guide covers survey sequencing, documentation and closing in more detail.

Buying Through a Curated Network

With the GT63 out of production and a small number of boats changing hands, the best examples often trade privately, between owners, captains and brokers who know the specific hulls. Public portals show only part of the picture, and their prices are asking figures. Obsidian Helm works with principals who prefer a discreet, advisory-led process: defining the requirement, sourcing through a vetted network, coordinating independent survey and engine analysis, and negotiating on documented findings instead of a seller's narrative. We do not take a dealer's incentive to move inventory, and we treat every hull on its merits.

Sources and further reading

Considering a Sportfish Acquisition?

Obsidian Helm advises principals on discreet yacht sourcing, independent survey coordination and negotiation. Request an invitation to discuss your requirements in confidence.

Request Your Invitation

Frequently asked

Is the Hatteras GT63 still in production?

No. Hatteras's own website shows its GT series as legacy models and does not list the GT63, so every example is pre-owned. YachtBuyer gives a 2012 to 2018 production span, while Power & Motoryacht tested one in 2011, so dates differ by source. Confirm the build year, engine option and bridge type of each boat.

What are the main specifications of the Hatteras GT63?

Hatteras lists the GT63 at 63 ft 10 in length overall, about 66 ft 11 in with the bow pulpit, with a 20 ft beam, 5 ft draft and roughly 102,000 lb displacement. It carries 1,900 US gallons of fuel. Standard power is twin 1,600 bhp Caterpillar C32A diesels, with 1,800 or 1,900 bhp C32 ACERT options.

How fast is a Hatteras GT63?

Power & Motoryacht tested a boat with 1,900 bhp Caterpillar C32 ACERT engines and recorded 35.0 mph at 1,750 rpm, 40.7 mph at 2,000 rpm and 46.2 mph at 2,250 rpm, burning roughly 124, 152 and 200 gallons per hour. Marlin recorded 41.3 knots. No test figures were found for the standard 1,600 bhp engines.

How much does a used Hatteras GT63 cost in 2026?

Public data is sparse. YachtBuyer lists last asking prices of $1.7 million to $2.6 million for 2012 and 2015 boats sold in 2021, and cites a current start from 1,995,000 euros for a 13-year-old boat. That span is arithmetic on asking prices, not a valuation; they are not transaction prices, and condition, engines and refit currency matter.

What should I inspect on a used Hatteras GT63?

Prioritize Caterpillar service records and oil analysis, the bridge configuration (on an enclosed bridge, check window seals and drainage), through-hulls and transducer penetrations, running gear, tower and outrigger mounting, any teak cockpit sole, and the age of the electronics. Also verify builder warranty work, since Hatteras has changed owners several times since the model launched.

How does the Hatteras GT63 compare with a Viking 64 or Jarrett Bay?

The GT63 is a production boat with resin-infused fiberglass construction and published sea-trial data. Viking builds semi-custom fiberglass sportfishers in New Jersey, while Jarrett Bay builds fully custom cold-molded boats in Beaufort, North Carolina. The right choice depends on how much customization you want, so compare individual boats on engine fit, bridge type and condition.

By Invitation Only

The office answers.
The rest is silence.

Tell us, in confidence, what keeps you up. We reply privately, under NDA.

Request Your Invitation
Related Briefings
Replies under NDA · Strictly Confidential